Latest articles on Tectite 
Tectite Sprint Socket Depth Gauge enables tube preparation to be completed quickly and safely(10/10/2007)
Pegler Yorkshire has introduced a Tectite Sprint Socket Depth Gauge. This unique three in one device has been designed especially for the Sprint range to make life for the installer as easy and trouble free as possible and allows Tectite Sprint to be prepared and installed rapidly. The Socket Depth Gauge allows the installer to mark the correct socket depth and also incorporates a deburring tool, which removes any burrs or sharp edges from the external tube end and a scribe function enables Tectite Sprint to be used in conjunction with chrome plated tube. When marking the socket depth, many installers make do with a tape measure and marker pen, but this must be done accurately. With the Socket Depth Gauge, this process is quick and easy. Simply insert the tube into the gauge and run ... [read full article]
Tectite Sprint push-fit System for faster and easier installation(31/05/2007)
The new NHBC housing regulations were introduced in September 2006 and require that any plastic pipes located behind wall surfaces are made detectable, by applying metallic tape if necessary. This whole time-consuming process is unnecessary if installing a Tectite Sprint push-fit System with Yorkex copper tube, a combination that also provides electrical continuity. Tectite Sprint is the newest product within Yorkshire Fittings’ Tectite push-fit range. Tectite Sprint metal plumbing and heating systems can take up to 67% less time to install, and ensure trouble-free compliance with clause S2 of the new NHBC regulations, according to Yorkshire Fittings. Tectite Sprint push-fit fittings are manufactured from copper or DZR brass in sizes from 10mm to 28mm, and have a non-demountable sli... [read full article]
Yorkshire water systems installed at new Arena housing development(18/03/2007)
The Arena development by Laing Homes comprises one to four bedroom properties in self-contained buildings of up to four storeys. Each building has its water delivered through a riser, which feeds directly from the cold water pump mains to a central point within the building. The risers then deliver water to each individual apartment via a network of pipes. This new development of apartments and houses in Warwick will benefit from water systems featuring products from Yorkshire, the company which has recently announced a commercial integration with taps and valves specialist Pegler. Each riser features XPress Copper press-fit fittings, Tectite Pro push-fit valves and Tectite Sprint push-fit fittings. Seven risers out of a total of twenty-three have been installed so far, with XPress C... [read full article]
Print version | 
Email to a friend | 
View other articles
Other plumbing, heating, ventilation and air conditioning news
Air conditioning news - Bathroom news - Heating news - Installation news - Pipework news - Shower news - Ventilation news - Industry news - Services news - News by company - News by product category
Air conditioning news - Bathroom news - Heating news - Installation news - Pipework news - Shower news - Ventilation news - Industry news - Services news - News by company - News by product category
